Drilling feet in glass is no easy task. It requires precision, the ideal tool, and a entirety lot of patience.

You are watching: How to make a hole in a glass bottle with a lighter

But have actually you ever before tried producing an opening in a glass without the use of a drill? that’s right, the possible!

There are many ways to do glass feet that carry out not require a drill in today’s world. Even if it is you’re working through stained glass or your old window, these advice will aid you gain the job done!

This post will show how anyone deserve to make holes in any glass material using straightforward tools and also household items.

Table of Contents:

Conventional Drill-less choices In making a Glass feet Without cracking ItOption 1: making use of a Soldering IronHow to make a hole in a Glass Bottle with a Lighter and also Duct tape TechniqueOption 2: paper and Kerosene or Alcohol MethodOption 3: making use of a Glass CutterOption 4: String and also Kerosene MethodOption 5: Oil and also Carbide stonework BitUnconventional or current Drill-less choices In make a Glass HoleOption 1: Water JettingOption 2: Laser CuttingFrequently asked QuestionFinal Thoughts

The benefits of making a Glass hole Without a Drill

No doubt, the primary an inspiration for this task is that you don’t have a drill! however there space some other good reasons to use only hand-operated tools.

The first benefit is cost. Countless of these techniques will conserve money by permitting you to avoid buying a power tool, such as a Makita or Bosch Cordless Drill.

Some human being don’t want to to buy a power tool for one-time usage only. Utilizing your strength of invention instead of just plugging in one appliance deserve to be funny too.

Of course, it likewise saves money ~ above energy because you’re not utilizing electricity. Finding out drill-less alternatives is also an excellent if yes a strength failure or lengthy outage.

Another advantage to doing it you yourself is customization. It will permit you to produce holes in any shape and size with much greater flexibility than a drill.

Conventional Drill-less choices In make a Glass hole Without cracking It

Practical people often do glass holes using typical methods and ingenuity. These approaches are tho viable today, even if it is for historical re-creation or purely because that the an obstacle of learning exactly how to perform it without a drill.

Here are few of them:

Option 1: using a Soldering Iron

A soldering iron is a must-have for every hobbyist and also handyperson. You have the right to use it come weld steel parts with each other to kind either mechanically or electrical bonds.

Using this small handheld machine isn’t minimal to metal. Another good use of the soldering steel is putting holes into a glass!


MaterialsSoldering IronGlass materials you desire to placed holes into (glass bottle, glass jar, glass pipe)MarkerSandpaperSafety gearStep-by-step Process

Video: reduced a feet In a Glass party (Using a Soldering Iron)

Decide whereby you desire to ar the hole. Usage the marker to attract a unstable circle or any kind of shape friend want.Pre-heat the soldering iron in ~ its sexy temperature. Be sure that you screen how warm your iron it s okay so the you will recognize when that is just right for melt the glass.

Always wear her safety gear such together gloves and eye security to avoid any injuries.

When the soldering stole reaches the appropriate temperature, touch it on the glass in ~ the spot wherein you drew your guide. Make certain to organize the pointer of your iron in one area because that a couple of seconds and then move it.

Your goal is to create a crack or a split. A pro guideline is to score the guide you made to have even and almost straight edges.

Once a crack has formed, continue moving the soldering iron. The break will follow the heat. If it stops moving, try to warm the other side of the crack.When you finish the form you wanted, the glass will just come off. However, in part instances, the crack will not move when you’re close to the point where you started. In this case, you deserve to gently nudge the item you desire to remove, and also voila, you’re done!Use a good grade wet or dry sandpaper to also the edges.
Read More: finest Student Room Decoration: Ideas and also Tips

I understand what you’re thinking, I’ll simply use the iron come burn off the edges.No, never do that. It will certainly create much more cracks, and your initiatives will be lost.

Pros and Cons

This an approach is an excellent if you’re already familiar v soldering irons.

If not, this would be a great time to learn around the tool. Familiarity have the right to save girlfriend money on projects like this in the long run.

This an approach is straightforward to perform, however it may require an ext patience than various other methods. The warmth needed because that this technique can also crack certain varieties of glass because of its extreme nature.

How to do a hole in a Glass Bottle through a Lighter and also Duct ice Technique

This technique hails from MacGyver’s mind and also you can remember law this in 7th grade.


If you’re having trouble remembering how to carry out this science experiment, don’t worry! It’s remarkable easy.

MaterialsDuct tapeLighterA bowl of cold waterSandpaperSafety gearProcessCover the bottom component of the bottle v duct tape. If you’re working with flat glass, put the ice cream on both political parties of the area you want to puncture a hole.Put cold water around the ar you desire to put the hole. The water protects other locations from obtaining heated.Heat the area for around a minute to soften the glass. Wear her safety gear such together gloves and eye protection while act this part to avoid any injuries.Wearing gloves and keeping your head back, push your ballpen or pond onto the glass. Intend to have to apply some pressure once trying to pass through through it.When you space successful in do the hole, clean increase the edges through sandpaper.Pros and Cons

Convenient. It’s a fast and also easy method that requires little to no former experience. This an approach is also great way to save money

The downside is that you may need an ext than one shot if friend don’t have actually much practice at this art.

Option 2: document and Kerosene or Alcohol Method

Another conventional means to bore a hole in a glass is to use a three-square file and kerosene or any type of low-density lubricant.

MaterialsA three-sided fileKerosene or various other low-density lubricants like turpentineSafety gearProcessPut part lubricant in ~ the end of the file. You have the right to put some more lubricant along the process if you feel the document is as well dry.Place the end versus the glass and start turning it. It’s best to score or mark the hole first to acquire the wanted position.

Always wear your safety gear such together gloves and also eye defense to avoid any type of injuries.

Turn the file clockwise and counterclockwise with a sufficient amount the pressure.Pros and also Cons

Convenient. It’s fast and easy. The standard at-home an approach requires no prior filing experience, just patience to make a feet in your glass effectively.

On the other hand, it’s a an extremely laborious and also time-consuming point to do. If girlfriend don’t have actually time come spare, this technique is no for you.

Option 3: using a Glass Cutter

A glass cutter is a very effective method to make holes in glass. You can find these devices in hardware stores. If you want the best quality for your money, turn to digital retailers like eBay and Amazon.

A point about safety: v a glass cutter, girlfriend will need a most patience together you need to go over and over the very same area multiple times.

Materials to it is in UsedGlass cutterDuct TapeMarkerSafety GlovesCompass or a perfect round party capSandpaper


Step-by-Step ProcessWear your security gloves very first before handling any of the products used in this process.Draw a circle on the glass and then subtract half an customs or quarter of an inch from that circle’s diameter. Girlfriend can readjust your measurements relying on what size you desire for her glass hole.

Note:Do psychic that larger holes will have actually less structure support!

Mark this measurement v your permanent marker. Ar duct tape end the area whereby you will certainly be tracing the inside of the reduced line. These will certainly act as guidelines as you continue with make a perfect glass hole utilizing a cutter tool.

Note: the width of these lines have to not exceed one or 2 millimeters.

Now hold the cutter in her hand choose a pencil and also slowly scrape the glass with it.Once the one is complete, eliminate the center piece of glass utilizing your ignorance or a wooden hammer.Clean the edges with sandpaper.Pros and also Cons

It is a cost-effective alternate to a drill. Friend just need to remember the it requires rather a little bit of hand strength and patience to be successful.

This technique is also really inefficient, as sanding down the edges reduces that durability over time. Moreover, friend should take into consideration doing this procedure in an area free from distractions and also people about you.

Option 4: String and Kerosene Method

Using string and kerosene could seem unconventional, yet this procedure is an extremely effective in do a hole on glass. This method is an ext used as soon as cutting party in half to do drinking glasses.

Still, you can use this procedure in level glass, yet it can take part time come master and also properly execute it.

Materials to be UsedKeroseneSafety gearString (cotton or twine)Matches or a lighterMarker
Step-by-Step ProcessFirst, recognize at what height you desire to reduced the bottle with a marker. For flat glass, create where you desire to placed the holes.Cut the string to your desired length. The dimension of the feet or your bottle determines the length of the string.

As a agree tip, reduced an ample wire length: not also short and also not too long. The size of the cable will influence the process.

Soak the string and put it end the guide you made. Constantly wear a mask and also safety equipment when law this method.Once in place, collection the cable on fire.After the string has shed for a couple of minutes, you have the right to remove the hole by tapping top top the glass. Clean turn off the edge by using sandpaper.Pros and also Cons

This alternative does no require lot material. It provides you the most professional and cleanest look.

The string deserve to burn the end a tiny too fast before you acquire to whereby the feet is. Or worse, it can lead to an accident that might cause inflammation on your hands or arms.

Option 5: Oil and Carbide stonework Bit

Using this method, friend will have a clean hole v no cracks. Even though it will not look as “perfect” as making use of string or other methods that can produce a shattered-glass effect, over there is much more room for error in the process.

Because of their strength and durability, carbide stonework bits are amongst the best tools.


Materials to it is in UsedTape (for flat glass) / Water (for glass bottle)Carbide bitOilSafety gearSandpaperProcessFor flat glass, put tape roughly the area you desire to boring a hole. Because that glass bottles, fill them with water come lessen the vibrations during the process.Like the record and kerosene method, oil the drill bit’s tip and gently press it against the glass. Don’t press too hard, or you break the glass.Once you have actually made a hole, clean the edges through sandpaper.Pros and also Cons

This alternative comes through cheaper materials yet is likewise likely to acquire messy due to the fact that it uses oil together a lubricant. Carbide masonry bits do not work-related well on heat-absorbing glass types, like dual pane glass.

It might additionally cause burns on her hands. Use this an approach with caution!

Unconventional or recent Drill-less alternatives In making a Glass Hole

Other than typical methods, there are additionally unconventional ones. These approaches are expensive and also are usually minimal to advertisement use.

However, if you have actually a big budget, you can want to look at these options:

Option 1: Water Jetting

A water jet machine is a special form of drilling that provides water and also high pressure. In this method, water is pushed out of a hose-like device at 80 come 150 mph, making small holes in the glass as it erodes it.

Materials to it is in Used

All you require to have actually is a water jet an equipment and part glass.

Most human being opt come avail the services of a shop that has the machine. However, the water jet contents are readily available for purchase.

Step-by-Step ProcessThe process is prefer that of common drilling. You can either ar the glass top top a table, stick that on a communication or lay it flat on the floor.Protect the surrounding locations by placing protective sheets or various other materials roughly to stop them from gaining wet.Clean the area making use of soapy water and also rinse that thoroughly.Apply 2 layers of tape along the edges of wherein you intended to drill your hole. Make certain that one next of every layer tapes over another, thereby connecting both sides.Make feet in these spots using a suitable tool, such together an awl, before setup up your jet device for drilling.To assure safety, usage eye protection as soon as operating this kind of equipment.Pros and Cons

Right turn off the bat, this devices is the it produces no harmful fumes or wastes. It also doesn’t produce noise compared to other approaches you deserve to use because that the task.

The just downside to this one is the it produces thermal stress and anxiety within her material. It happens whenever friend pour hot water, which causes cracking the the glass.

Option 2: Laser Cutting

Some civilization might think the lasers room only used to cut through thick piece of metal. However, girlfriend can also utilize them for cutting glass.

A laser cutter is a form of device which uses various gases with high energy wavelength emissions to reduced easily into the material being worked on. It’s no exemption when that comes down to functioning on thin sheets or objects made from glass!


Materials to be Used

You need a laser cutting machine and a worktable.

As the water jet machine, friend can select to use the services of a shop that has the laser. Still, the laser cutter’s components are readily accessible online and in physics stores.

Step-by-Step ProcessFirst, you must have a pattern for cutting the glass. Over there are numerous templates ~ above the net that can be downloaded and used for this purpose.The template’s architecture should include separating the materials right into two layers. The machine will use the an initial layer for support, and also the laser cutter maker will cut the other.Once everything has to be done, power up the unit through flipping its switch or pulling.The an equipment will automatically stop when it’s finished.Pros and also Cons

Also, laser cutters enable for high-precision cut that space precise, especially when compared to those made using drills or even diamond-tipped tools.

There is no damage to her material. However, over there is tho thermal stress in the glass.

Frequently inquiry Question

How execute you make a hole in a glass party without tools?

There are numerous ways you can put a feet in a glass bottle. You deserve to either usage a glass cutter or a soldering stole to have actually a perfect hole.

How execute you make a hole in glass in ~ home?

If friend don’t have the appropriate tools to make holes in glass, we extremely suggest utilizing the string and kerosene method. It only supplies items usually found at home, therefore it’s really easy to do.

What is the best drill bit for glass?

There are cobalt, titanium, and also other species of drill bits. Yet the perfect drill bits because that glass room the diamond and also carbide ones.

See more: Lemans Kartin G Force Karts Portsmouth Portsmouth Va, Lemans Karting Portsmouth

Final Thoughts

There space several approaches in make a hole in the glass without using drills. The an approach you usage will entirely come under to the form of glass you’re working with, your skill level, and how lot time friend have.